Allows user to restrict the portfolio of frequency bands that are supported by our routers.

bandsel.v2.tgz

bandsel.v3.tgz

BandSelect_Application_note_20200618.pdfEnglish

Provides a service called captive portal on routers. Landing page, QoS and monitoring of users on WiFi interface.

captive_portal.v3.tgz

captive_portal.v2.tgz

Captive_Portal_Application_note_20200618.pdfEnglish

Command line tool and library for transferring data with URLs. This is part of our FW since version 5.0.0!

curl.v2.tgz

curl.v3.tgz

Configurable daily router reboot.

dailyReboot.v3.tgz

dailyReboot.v2.tgz

DailyReboot_Application_note_20200618.pdfEnglish

Ethernet Mirroring is used for port mirroring to monitor and analyze the incoming and outgoing traffic during RTU P2P test and trouble shooting. This UM is compatible with FW 6.1.8 and newer.

eth_mirror.v2.tgz

eth_mirror.v3.tgz

Ethernet_Mirroring_Application_Note_20200618.pdfEnglish

Adds the ability to create ext4 file systems, check them and mount them. Intended only for SmartFlex and SmartMotion routers with FW 5.3.4 or newer. This user module is intended only for SmartFlex and SmartMotion routers with FW 5.3.4 or newer.

ext4_tools.v3.tgz

Ext4_tools_Application_note_20200618.pdfEnglish

Periodic sending System log and Report files to the selected email address or FTP server.

fileUploader.v3.tgz

fileUploader.v2.tgz

File_Uploader_Application_note_20200618.pdfEnglish

Firmware Over-The-Air (FOTA) user module allows router to wirelessly upgrade and update the operating firmware of a cellular module. Currently, only a few cellular modules are supported.

fota.v3.tgz

FOTA_Step_by_Step_20190131.pdfEnglish

Firmware_Over-The-Air_Application_Note_20200618.pdfEnglish

You can use GDB to debug programs written in C, C++. GDB is invoked with the shell command gdb. Once started, it reads commands from the terminal until you tell it to exit with the GDB command quit. You can get online help from gdb itself by using the command help.

gdb.v2.tgz

gdb.v3.tgz

GPS/GNSS receiver support.

gps.v2.tgz

gps.v3.tgz

GPS_Application_note_20200618.pdfEnglish

Client that runs inside Advantech routers, to enable them to connect with SmartWorx Hub.

hmpclient.tgz

Allows user to embed information banner ahead of the login form.

httpBanner.v3.tgz

httpBanner.v2.tgz

HTTP_Banner_Application_note_20200618.pdfEnglish

Virtual interface for management. 

loopback.v2.tgz

loopback.v3.tgz

Loopback_Application_Note_20200618.pdfEnglish

Midnight Commander is a visual file manager (console application with a text user interface). The main interface consists of two panels which display the file system. 

mc.v2.tgz

mc.v3.tgz

This user module provides TCP and UDP scan.

nmap.v2.tgz

nmap.v3.tgz

NMAP_Application_note_20200618.pdfEnglish

Time synchronization using NTP version 4 protocol. The module includes support for client and server operations as detailed in IETF RFC 5905.

ntp.v2.tgz

ntp.v3.tgz

Gains a more accurate location via Ntrip protocol. Each router which has enabled the user module can be considered as Ntrip Client.

ntripClient.v2.tgz

ntripClient.v3.tgz

NtripClient_Application_note_20200618.pdfEnglish

OpenVPN Custom Config user module can be used to configure up to four another OpenVPN tunnels on the router.

openvpn_custom_config.v2.tgz

openvpn_custom_config.v3.tgz

OpenVPN_Custom_Config_Application_note_20200618.pdfEnglish

Allows to run one resettable and one non-resettable time counter for each binary input of the router.

ophrscounter.v2.tgz

ophrscounter.v3.tgz

Operational_Hours_Counter_Application_note_20200618.pdfEnglish

Allows to send SMS messages longer than standard of 160 characters.

pduSMS.v3.tgz

pduSMS.v2.tgz

pduSMS_Application_note_20200618.pdfEnglish

Manually or automatically verifies functionality of connection between Smart Router and a device eventually of two devices. Ping and traceroute are used for this purpose.

pinger.v3.tgz

pinger.v4.tgz

pinger.v2.tgz

Pinger_Application_note_20200618.pdfEnglish

CONEL_AVAILABILITY_MIB.my

Sends queries from the AMR (Automatic Meter Reading) system to a meter through an IP network using the router as a gateway.

suiteHT.v2.tgz

suiteHT.v3.tgz

Suite_HT_Application_note_20200618.pdfEnglish

Regular sending of System log and Report files to the specified email or FTP server.

sendReport.v2.tgz

sendReport.v3.tgz

SendReport_Application_note_20200618.pdfEnglish

Service Access Limitation of HTTP, FTP, SSH... on particular interfaces.

service_acl.v2.tgz

service_acl.v3.tgz

Switch the router into Low Power Mode and wake it up. Advanced options based on binary inputs and time.

sleepmode.v3.tgz

Sleep_Mode_Application_Note_20200618.pdfEnglish

Adds the ability to use the router as an SSH client. This means that the module allows to establish the SSH connection to the remote router and execute commands on it.

sshclient.tgz

SSHclient_Application_note_20200618.pdfEnglish

Check of the TCP connection with a defined IP address.

tcpsynka.v2.tgz

tcpsynka.v3.tgz

TCP_SYN_Keep-Alive_Application_note_20200618.pdfEnglish

This user module can be used for blocking specific URLs on WiFi interface.

url_blocker.v2.tgz

url_blocker.v3.tgz

URL_Blocker_Application_Note_20200618.pdfEnglish

Vim is a highly configurable text editor for efficiently creating and changing any kind of text.

vim.v2.tgz

vim.v3.tgz

This user module allows executing of shell commands on a router over standard HTTP(S) connection.

webTerm.v2.tgz

webTerm.v3.tgz

Allows the router to switch automatically between up to four SSIDs – WiFi networks.

wifi_ssid_switch.v3.tgz

wifi_ssid_switch.v2.tgz

WiFi_SSID_Switch_Application_Note_20200618.pdfEnglish

Transparent mode (WiFi interface in client mode bridged to ETH).

wifi_relay.v2.tgzEnglish

wifi_relay.v3.tgzEnglish

Listens to communication on the selected UDP port and forward these packets to appropriate address as a broadcast.

WoLGateway.v3.tgz

WoLGateway.v2.tgz

WoL_Gateway_Application_note_20200618.pdfEnglish

Allows to reconfigure CNT board directly inside of router (intended for v2 routers only). There are three possible congurations:

• 4x BI
• 3x BI + 1x CNT
• 2x BI + 2x CNT

xccnt_update.v2.tgz